Broadcom NetXtreme N225P - 2x 25G/10 GbE OCP 3.0
- Brand
- Broadcom
- Product code
- BCM957414N4140C
- SKU
- K8F4OMKRT0PKO
- 2x 25G/10 GbE OCP 3.0
- Weight: 0.19 KG
Product Info
Broadcom's NetXtreme E-series network controller delivers best-in-class performance and hardware acceleration and offload capabilities that result in higher throughput, higher CPU efficiency, and lower workload latency for TCP/IP as well as RoCE traffic.
Broadcom OCP NIC 3.0 Ethernet adapters utilize the NetXtreme marketleading 25G NRZ, 50G PAM-4, and PCIe 4.0 SerDes technology, ensuring seamless interoperability with Broadcom's market-leading Top-of-Rack switch and PCIe Express switch solutions which also use the same SerDes technology
Description
Enhanced connectivity
Equipped with two SFP28 connectors, the Broadcom NetXtreme E-Series N225P network adapter offers versatile 10Gb and 25Gb Ethernet connectivity, ensuring high-speed data transfers and efficient network performance.
Advanced networking features
This network adapter supports a wide range of features such as Data Center Bridging (DCB), Enhanced Transmission Selection (ETS), and Low Latency RDMA over Converged Ethernet (RoCE), enhancing data center operations and network efficiency.
Comprehensive protocol support
With support for both IPv4 and IPv6, the N225P ensures future-proof networking capabilities. Jumbo Frames, Large Receive Offload (LRO), and Large Send Offload (LSO) support further optimize data flow for improved network performance.
Virtualization and management
Features like Single Root I/O Virtualization (SR-IOV), Network Virtualization using Generic Routing Encapsulation (NVGRE), and Virtual Extensible LAN (VXLAN) support make the N225P ideal for advanced virtualized environments and cloud deployments.
Energy-efficient design
Incorporating IEEE 802. 3az (Energy Efficient Ethernet), the Broadcom NetXtreme E-Series N225P minimizes power consumption during periods of low data activity, contributing to reduced operational costs and a greener network.
| General | |
|---|---|
| Form Factor | Plug-in card |
| Device Type | Network adapter |
| Interface (Bus) Type | Open Compute Project mezzanine (OCP) 3.0 |
| Expansion / Connectivity | |
| Interfaces | 2 x 10Gb Ethernet/25Gb Ethernet - SFP28 |
| Networking | |
| Connectivity Technology | Wired |
| Data Link Protocol | 10 Gigabit Ethernet, 25 Gigabit Ethernet |
| Ports | 10Gb Ethernet/25Gb Ethernet x 2 |
| Compliant Standards | IEEE 802.3ap, IEEE 802.3az |
| Features | WOL, IPv6 support, DCBX support, IPv4 support, PXE support, LSO, LRO, RSS, UEFI support, SR-IOV, DCB, TSO, MSI-X, GRE, iSCSI boot, PFC, NC-SI, VXLAN, NVGRE, FLR, MSI, Jumbo Frames support (up to 9000 bytes), MCTP over SMBus, TruFlow, Interrupt coalescing, VMMQ, ETS, QCN, GENEVE support, Low Latency RDMA over RoCE, OCP 3.0 support, vSwitch Acceleration, tunnel-aware stateless offloads, SMBus 2.0, NetQueue |
| Miscellaneous | |
| Compliant Standards | EMC |
| Environmental Parameters | |
| Min Operating Temperature | 0 °C |
| Max Operating Temperature | 55 °C |
| Processor / Memory | |
| Processor | Broadcom BCM57414 |
| Dimensions & Weight | |
| Weight | 91 g |