• InfiniteFix Product Image
HPE FlexNetwork 5140 8G 2SFP 2XGT Combo EI

HPE FlexNetwork 5140 8G 2SFP 2XGT Combo EI - Switch - L3 - smart - 8 x 10/100/1000 + 2 x 1 Gigabit / 10 Gigabit SFP+ + 2 x combo 10GBase-T - rack-mountable - BTO


Brand
Hewlett Packard Enterprise
Product code
R8J42A#ACC
SKU
2V20XWJ1DNX9L
EAN/GTIN
190017527048
  • Gigabit Ethernet access switch with static layer 3 routing, RIP, high density 10GbE uplinks, and POE+ models for voice, video, and wireless
  • Supports IRF technology that enables Plug and Play device aggregation and link aggregation across multiple devices, enhancing network redundancy and resource utilization
  • Includes embedded network management capabilities with Smart Management Center (SmartMC)
  • Includes energy-saving green design features such as automatic switching of idle ports to energy-saving mode and powering down unused ports
€1345.07 (Inc. VAT)
Sold Out
(Delivery 2-4 working days)

Description
Scalability and high availability

The HPE FlexNetwork 5140 EI Switch Series delivers scalability and enhances reliability of the network with HPE Intelligent Resilient Fabric (IRF) technology. IRF stacking enables virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router.

Comprehensive security control

The HPE FlexNetwork 5140 EI Switch Series supports flexible authentication methods including 802.1X and MAC Authentication for greater security and policy-driven application authentication. Per-user access control lists (ACLs) provide identity-driven security and access control.

Simplified management

The HPE FlexNetwork 5140 EI Switch Series can be seamlessly managed with HPE Intelligent Management Center (IMC) to provide end-to-end network transparency with a consistent network experience through comprehensive configuration, compliance, and policy management.

Enhanced quality of service

The HPE FlexNetwork 5140 EI Switch Series supports advanced classifier-based QoS which groups traffic using multiple match criteria based on Layer 2 and 3 information, it applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or entire switch.

General
Device type Switch - 12 ports - L3 - smart
Enclosure Type Rack-mountable 1U
Subtype Gigabit Ethernet
Ports 8 x 10/100/1000 + 2 x 1 Gigabit / 10 Gigabit SFP+ + 2 x combo 10GBase-T
Performance Latency (1000 Mbps):5 µs Latency (10 Gbps):3 µs Throughput:18 Mpps Routing/switching capacity:128 Gbps
Capacity IPv4 routing table entries:512 IPv6 routing table entries:256 VLAN IDs:4094
MAC Address Table Size 16384 entries
Jumbo Frame Support 9216 bytes
Routing Protocol OSPF, RIP-1, RIP-2, IGMP, OSPFv2, IGMPv3, OSPFv3, static IPv4 routing, static IPv6 routing, CIDR
Remote Management Protocol SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, CLI, SCP, SNMP 6, NTP, ICMP, DHCP, RADIUS
Encryption Algorithm SSL
Authentication method Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2), HWTACACS
Features Flow control, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Weighted Round Robin (WRR) queuing, IPv6 support, High Availability, full duplex mode, sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Virtual Route Redundancy Protocol (VRRP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Committed Access Rate (CAR), RADIUS support, DHCP server, MLD snooping, Device Link Detection Protocol (DLDP) support, STP Root Guard, IPv4 support, LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), Port Security, Smart Link Pass-Through, Energy Efficient Ethernet, dynamic ARP protection, DHCP protection, Multiple VLAN Registration Protocol (MVRP), Strict Priority Queuing (SPQ), port isolation, Generic Attribute Registration Protocol (GARP), OpenFlow support, IP source guard, ICMP Router Discovery Protocol (IRDP), Link Aggregation, VLAN Double Tagging (Q-in-Q), LLDP-MED, Smart Link, Guest VLAN, Ethernet OAM, proxy ARP, Weighted Round Robin (WRR), Intelligent Resilient Fabric Technology (IRF), BPDU protection, UDP support, Multiple Registration Protocol (MRP)
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3i, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.3ac, IEEE 802.1s, IEEE 802.1ad, IEEE 802.3ah, ANSI/TIA-1057, IEEE 802.1ab (LLDP), IEEE 802.1ak, IEEE 802.3at, IEEE 802.3az, IEEE 802.1AX, IEEE 802.1r
RAM 512 MB SDRAM
Flash memory 256 MB
Expansion / Connectivity
Interfaces 8 x 1000Base-T RJ-45 2 x Gigabit / 10Gbit LAN SFP+ 2 x Gigabit / 10Gbit LAN RJ-45 1 x console RJ-45 management
Power
Power Device Internal power supply
Power Provided 10 A
Voltage Required AC 100-240 V (50/60 Hz)
Miscellaneous
Rack Mounting Kit Included
Compliant Standards Plug and Play, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, ICES-003 Class A, RoHS, UL 60950-1, IEC 60950-1, WEEE, EN 60825-1, FCC Part 15 B Class A, EN 60825-2, IPv6 Ready, EN 300 386, FDA 21 CFR, AS/NZS CISPR 32 Class A, YD/T993, IEC 62368-1, EN 55032, CAN/CSA-C22.2 No. 60950-1, VCCI-CISPR 32:2016 Class A, ETSI EN 300 386, EN 62368-1:2014/A11:2017, GB/T9254
Pricing Type BTO
Localisation English / United Kingdom
Dimensions & Weight
Width 26.6 cm
Depth 16 cm
Height 4.36 cm
Weight 1.5 kg
Manufacturer Warranty
Service & Support Limited warranty - lifetime
Environmental Parameters
Min Operating Temperature -5 °C
Max Operating Temperature 50 °C
Humidity Range Operating 10 - 90% (non-condensing)
Min Storage Temperature -40 °C
Max Storage Temperature 70 °C
Humidity Range Storage 5 - 95% (non-condensing)
We do not guarantee the completeness and accuracy of the product details, which are obtained from outside sources.
We use cookies!
By remembering your preferences and frequent visits, we can provide you with the most relevant experience on our website through the use of cookies. You can provide your permission for the usage of all cookies by clicking "Accept". To give a controlled consent, you can explore the Cookie Settings.