Crestron SIW-100 - Meeting room availability indicator - grey
- Brand
- CRESTRON ELECTRONICS
- Product code
- SIW-100
- SKU
- 8LUGWCOX9BDZ2
- Provides highly-visible indication of room availability
- Reveals every free meeting room at a glance down the hallway
- Stylish wall mount design with clear acrylic lens
- Clearly visible at 50 feet or 15 meters
- Out-of-the-box functionality when used with a TSS-7, TSS-10, TSW-760(-NC), or TSW-1060(-NC) series touch screen
- Illuminates vivid green or red to indicate room availability status
- Custom functionality possible when connected to a Crestron control system
- Supports RGB color mixing via custom control system programming
- Allows virtually any color illumination (except white)
- Energy efficient at less than 2 Watts power consumption
- Single-wire USB or Cresnet connectivity
- Mounts to a single-gang electrical box or plaster ring
Description
Room availability status
For room scheduling applications, the SIW-100 simply connects via USB to a Crestron TSS-7, TSS-10, TSW-760, TSW-760-NC, TSW-1060, or TSW-1060-NC series touch screen. No special programming or configuration is required. The indicator color is controlled by the room scheduling application, which runs on the touch screen and syncs with Crestron Fusion or another room scheduling service. The indicator illuminates green when the room is available and red when the room is occupied.
Custom RGB colors
For custom applications, the SIW-100 can be integrated with a Crestron control system and programmed to illuminate in a wide variety of colors. Its RGB LEDs can be controlled in 10% increments per color. When powered by USB, any single color LED can be used at full brightness, while if connected via Cresnet two color LEDs can be used at full brightness simultaneously. Three color mixing is possible when powered by Cresnet if each LED is limited to 70%. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired. Control system integration can be accomplished through a USB connection to a TSW-760(-NC) or TSW-1060(-NC) series touch screen, or through a Cresnet connection to the control system.
Simple installation
Installing the SIW-100 is simple. It mounts to the wall over a standard 1-gang electrical box or plaster ring. Power and communications are supplied by a single USB or Cresnet wire. A six foot (1.83 meter) USB cable is included, which connects to the touch screen mounted below. Alternately, a Cresnet cable (sold separately) can be run to a control system up to 3000 feet (914 meters) away. Cresnet allows for daisy-chaining multiple status indicators using a single cable.
| General | |
|---|---|
| Product type | Meeting room availability indicator |
| Interfaces Details | USB 2.0 Micro-USB Type B |
| Features | RGB LED illumination |
| Miscellaneous | |
| Included Accessories | Micro-USB cable |
| Product Material | Plastic |
| Colour | Grey |
| Power Consumption Operational | 2 Watt |
| Dimensions & Weight | |
| Width | 7.1 cm |
| Depth | 5.5 cm |
| Height | 16.3 cm |
| Weight | 454 g |
| Environmental Parameters | |
| Min Operating Temperature | 5 °C |
| Max Operating Temperature | 45 °C |
| Humidity Range Operating | 10 - 90% (non-condensing) |