HPE StoreEver MSL4048 Ultrium 15000 - Tape library - 288 TB / 720 TB - slots: 48 - LTO Ultrium (6 TB / 15 TB) - Ultrium 7 - max drives: 4 - SAS-2 - rack-mountable - 4U - barcode reader, encryption - Top Value Lite
- Brand
- Hewlett Packard Enterprise
- Product code
- P9G71A
- SKU
- OSSN0WYFQRYWI
- Partitioning for convenience
- Proven reliability
- Disaster recovery and security
- LTO Ultrium technology
Description
Partitioning
The MSL tape libraries include the ability to be configured as a partitioned library. MSL libraries may be configured with up to one partition per drive; four partitions if four drives are installed. Partitioning allows each partitioned library to be presented to the host as an independent library, separate from other partitions in the library. Hosts for each partition own independent sets of media and can use ISV software that is different from the other partitions allowing maximum flexibility and utilization of the MSL library.
Proven reliability
The MSL tape libraries provide necessary high reliability for today's demanding environment. To improve reliability and longevity, all HPE Ultrium products feature Data Rate Matching (DRM). This allows the tape drive to dynamically and continuously adjust the speed of the drive, to match the speed of the host or network. This increases performance, reduces mechanical wear on the tape drive and extends tape life.
Disaster recovery and security
Removable media also has the advantage that data is held offline which means that archive data on tape has the additional level of protection from the threats to on-line data from viruses, hackers and cyber-attacks. on the tape.
LTO Ultrium technology
HPE LTO (Linear Tape Open) Ultrium tape drives use breed technology. By taking the advanced features from other tape technologies and combining them into a single different technology, Ultrium tape drives are in a league of their own. Inclusion of ultimate features such as Adaptive Tape Speed (ATS) ensure that Ultrium drives can meet the performance and reliability demands of a library environment. LTO technology is an open industry standard format; thus data written on HPE Ultrium tape drives can be interchanged directly with Ultrium tape drives from other vendors.
| General | |
|---|---|
| Device type | Tape library - LTO Ultrium |
| Recording Standard | LTO Ultrium 7 |
| Enclosure Type | Rack-mountable - 4U |
| Interface type | SAS-2 |
| Total storage capacity | 288 TB (native) / 720 TB (compressed) |
| Removable Media Capacity | 48 |
| Average Media Exchange Time | 45 sec |
| Max Supported Drives | 4 |
| Supported Tape Drives | LTO Ultrium 7 |
| Key Features | Barcode reader, encryption |
| Built-in Devices | Led panel |
| Width | 48 cm |
| Depth | 80.6 cm |
| Height | 17.5 cm |
| Weight | 21.4 kg |
| Storage Removable | |
| Type | LTO Ultrium |
| Capacity | 6 TB (native) / 15 TB (compressed) |
| Supported Tape Cartridges (Read and Write) | Ultrium 6, Ultrium 7 |
| Recording Standard | Ultrium 6, Ultrium 7 |
| Data Transfer Rate (native) | 300 MBps (1.08 TBph) |
| Data Transfer Rate (compressed) | 750 MBps (2.7 TBph) |
| Buffer size | 1024 MB |
| Expansion / Connectivity | |
| Interfaces | 1 x SAS 6Gb/s 1 x (management) - RJ-45 1 x USB (management) |
| Miscellaneous | |
| Media Included Qty | 24 |
| Cables included | 1 x network cable |
| Rack Mounting Kit | Included |
| MTBF | 100,000 hour(s) |
| MSBF | 2,000,000 |
| Manufacturer Selling Program | HP Top Value Lite |
| Power | |
| Type | Power supply |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Power Consumption Operational | 312 Watt |
| Environmental Parameters | |
| Min Operating Temperature | 10 °C |
| Max Operating Temperature | 35 °C |
| Humidity Range Operating | 20 - 80% (non-condensing) |